Currency : INR ₹ Ships to India

New ATOMSTACK M50 Double Ultra-Fine Compressed Spot Laser Module Upgraded Fixed-focus Laser Engraving Cutting Module For Laser Engraver Machine 3D Printer CNC Milling DIY Laser

300

New ATOMSTACK M50 Double Ultra-Fine Compressed Spot Laser Module Upgraded Fixed-focus Laser Engraving Cutting Module For Laser Engraver Machine 3D Printer CNC Milling DIY Laser

19417.27 71843.68

Banggood
New ATOMSTACK M50 Double Ultra-Fine Compressed Spot Laser Module Upgraded Fixed-focus Laser Engraving Cutting Module For Laser Engraver Machine 3D Printer CNC Milling DIY Laser
New ATOMSTACK M50 Double Ultra-Fine Compressed Spot Laser Module Upgraded Fixed-focus Laser Engraving Cutting Module For Laser Engraver Machine 3D Printer CNC Milling DIY Laser
19417.27 71843.68

Description:
1. The M50 laser module can be installed on any engraver model of the Atomstack A5 series and can be used without any additional setup.
2. If you own other brands of engravers such as Ortur, NEJE, TwoTrees, etc., you can also install our Atomstack M50 laser module, which comes with a free adapter in the box.
Higher laser power, faster engraving speed! NEW ATOMSTACK M50 50W double ultrafine compressed spot Laser Module:can be used for laser cutting machine, laser engraving machine, CNC, DIY laser. Upgraded high quality fixedfocus laser, no need to focus. Engraving speed is 200% higher than other 5W lasers.
Specification:Brand
:Atomstack

Model:M50
Optical Output Power
:9.510W
Product Material
:Aluminum 6061 Anode

Housing Size
:44*52*50mm

Circuit Board Size
:44*52mm

Circuit Board
:12V/PWM Modulation Board

Wire Rod
:22# 2P2.54 Terminal Reverse Wire 80mm

Optical Lens
:/glass

Fan
:12V

Laser Beam Mode
:Spot

Working Mode
:Pulse Work

Lightspot Size
:0.08*0.06mm

Working Time
:10000H

Working Temperature
:0閭冦儫70閭僢r>
Storage Temperature
:鑽?0閭冦儫85閭僢r>
Sintering Temperature
:1000~1200閭僢r>
Product Net Weight:260g
Instructions:Click HereItems
:Symbol
:Min
:Typ
:Max
:Unit
:Condition

Optical Output Power
:Po
:
:9.5:10:W:12V Power

Working Current
:Iop
:/:2.9:3.2:A:

Operating Voltage
:Vop
:/:12:/:V:

Laser Wavelength
:p
:
:455:460:nm:

Electric Power
:Wl
:/:34.8:38.4:W
:

Features:
1. It can be used for laser cutting machine, laser engraving machine, CNC, DIY laser.
2. Laser protective cover:The laser is equipped with a protective cover to protect the eyes of the user without the need to wear additional protective glasses. At the same time prevent pets from grabbing the laser spot.
3. Made of aluminum, strong and durable.
4. Upgraded high quality fixedfocus laser, no need to focus.
5. Aviation aluminum TTL driver board with cooling fan can ensure continuous long time work.
6. Engravable materials:wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, nonreflective electroplating layer and lacquered metal.
7. Cutable material:cardboard, nonwoven fabric, veneer, acrylic, some thin plastic board.
8. 0.08*0.15mm double compression spot light coupling technology makes engraving more powerful
and precise .
9. Engraving speed is 200% higher than other 5W lasers.
10. High energy can cut 8.5mm thickness plates at one time.
11. The laser sintering temperature is 1100 degrees, the effect of engraving metal is better.
12. The laser has a builtin horizontal gyroscope antitip protection device, and it stops working when the tilt angle is 20.
13. The windcollecting hood can clean the dust to protect the lens to avoid laser energy attenuation.
14. The transfer circuit board is compatible with 95% of laser engraving machines on the market鏍梟cluding Atomstack, ortur, Neje, twotree, etc.
CAUTIONS:
1. The laser light emitted by the laser module is likely to injure persons’eye, so do not directly gaze its end surface and wear appropriate safety glasses to prevent laser light when it is working.
2. Laser module needs an appropriate laser driver(PCB). When the laser module connects with power supply, please set the output voltage to zero. The adjustment of the current should be slowly increased or decrease to avoid damaging the device.
3. Keep the device working or storing in a dry environment. The antidust grade is over one million, in order to prevent dust inside the lens to affect the laser dot shape.
4. Working at high temperatures will increase the threshold current, reduce conversion efficiency and speed up the aging of the device.
5. When output power is higher than it’s specific parameter of operation, it will accelerate the aging of the device.
6. When the operation temperature of the laser diode is over 70degree, please do well heat dissipation of it.
7. This laser module is an electrostatic sensitive device. Please make sure ground yourself or wear an antistatic wrist strap before you take it.
8. 0.08*0.06mm double compression spot light coupling technology makes engraving more powerful and precise .
9. Engraving speed is 200% higher than other 5W lasers.
10. High energy can cut 8.5mm thickness plates at one time.
11. The laser sintering temperature is 1200 閭?the effect of engraving metal is better.
12. The windcollecting hood can clean and dust to protect the lens to avoid laser energy attenuation.
13. The transfer circuit board is compatible with 95% of laser engraving machines on the market鏍梟cluding Atomstack, Ortur, Neje, Twotree, etc.
Package Included:1 x
:M50 Laser Module

1 x
:PCB Circuit Board

1 x
:Compatible Plate

1 x
:Fixed Focus Plate

1x:Connection Line

1 x
:Wrench

6 x
:Screws

1 x
:Power Supply

icon
We will be happy to hear your thoughts

Leave a reply

Recommendation
Register New Account
Shopping cart